OH32X02 Alloy Servo Saver

Description

MX0063 Alloy Servo Saver. This really is an essential upgrade for the OH32X02 Orlandoo Trophy Truck. The little 2.2g servo will only take so much abuse and the direct linkage in the kit won’t pull any punches when you run out of talent. Currently there are no bolt-in metal gear servos available, at least as far as we know. There are some around, but you will need to cut away the existing mounting tab and re-drill the cage. You will also need to either lift the body a few mm or cut a hole in the lexan as there really is no room under there.

This servo saver provides a much neater answer without the need to start cutting into your truck. Made from alloy and finished in smart anodized red and black, the arm is spring-loaded. You get four optional spring rates in the packet, so you can tune your steering perfectly according to available grip. Maintain steering authority, while providing a stay of execution for your servo, whether you run on carpet or loose dirt! It’s always best to try and avoid ramming into the scenery, but when you do at least your servo has a better chance of survival! The arm comes with the correct spline count for the AS0022 servo. It is also pre-drilled with twin M1.6 holes to accept the standard Orlandoo 2mm ball-end screws.

Specifications: MX0063 Alloy Servo Saver

• Construction: Alloy
• Color: Choose anodized red and black
• Quantity: 1x Servo Saver arm, 4x Springs

Compatible With:

• Orlandoo AS0017 or AS0022 Servo
• Orlandoo TA0011 Ball-End Screws (M1.6 thread)