A pair of alloy front wheel hubs to fit Geko GK-24 wheels. The hub secures to the axle using a 0.9mm grub screw. A proprietary double-flat end mates to a similar female socket on the inner face of the Geko wheels. A M1.6 screw then goes through the wheel from the outside, making it easy to change wheels.
Specifications: Front Wheel Hubs
- Construction: Alloy
- Finish: Red anodised
- Fitting (to axle): 3mm round hole and grub screw
- Fitting (to wheel): 5mm double-flat with M1.6 fixing screw
These hubs allow Geko wheels to be fitted to any 3mm shaft, making it possible to use Geko wheels with other brand axles. Please note that due to the design of the front hubs, you will likely need two sets of rear hubs to work with other brand axles. The hubs will also introduce significant offset when used this way.